StudentShare
Contact Us
Sign In / Sign Up for FREE
Search
Go to advanced search...

Department of Mechanical and Automotive Engineering - Coursework Example

Cite this document
Summary
Fluid flow through pipes generates friction that tends to lower the head of the flowing fluid. The loss of head may simply be measured by utilizing two manometers. However, if a detailed description of the total frictional loss is to be obtained then other measurements are necessary. …
Download full paper File format: .doc, available for editing
GRAB THE BEST PAPER93.7% of users find it useful
Department of Mechanical and Automotive Engineering
Read Text Preview

Extract of sample "Department of Mechanical and Automotive Engineering"

Download file to see previous pages

The flow through the pipe could either be laminar or turbulent and so the experiment will be directed to distinguishing the kind of flow. Flow should be started through the pipe being investigated. The pipe must have manometers installed on both ends of the region being investigated. The diameter of the pipe must be measured beforehand. The discharged fluid should be collected in an appropriate container that can aid volume measurement. A stop watch should be used to monitor the total time required for a certain volume to flow.

Starting with an empty container, the fluid should be allowed to flow through the pipe into the container. The experiment should be timed sufficiently to read the manometers on both ends. The flow should be stopped when enough volume of fluid has been collected in the container for measurement. The time required for the total flow should be noted along with the total volume of fluid collected. These values will be used to generate the flow rate. The readings on the manometers will be used to generate the total head loss value.

At least ten distinct experiments must be carried out by varying the flow rate inside the pipe. Using the measurements above in the formula the Reynold’s number can be calculated as: R_e=ρud/μ And velocity as: u=4Q/(πd^2 ) The velocity should be plotted against the head loss. If the head loss is proportional to the velocity then the flow is laminar while if the head loss if exponentially related to the velocity then the flow is turbulent. The Reynold’s number will confirm this investigation.

The flow through the pipe could either be laminar or turbulent and so the experiment will be directed to distinguishing the kind of flow. Flow should be started through the pipe being investigated. The pipe must have manometers installed on both ends of the region being investigated. The diameter of the pipe must be measured beforehand. The discharged fluid should be collected in an appropriate container that can aid volume measurement. A stop watch should be used to monitor the total time required for a certain volume to flow.

Starting with an empty container, the fluid should be allowed to flow through the pipe into the container. The experiment should be timed sufficiently to read the manometers on both ends. The flow should be stopped when enough volume of fluid has been collected in the container for measurement. The time required for the total flow should be noted along with the total volume of fluid collected. These values will be used to generate the flow rate. The readings on the manometers will be used to generate the total head loss value.

At least ten distinct experiments must be carried out by varying the flow rate inside the pipe. Using the measurements above in the formula the Reynold’s number can be calculated as: R_e=ρud/μ And velocity as: u=4Q/(πd^2 ) The velocity should be plotted against the head loss. If the head loss is proportional to the velocity then the flow is laminar while if the head loss if exponentially related to the velocity then the flow is turbulent.. These strains may easily be measured using strain gauges.

However, the empirical readouts from the strain gauges cannot be used directly at all because the values need to be calibrated first. The first step would be to determine the incremental loads that must be applied to the structure in question and also the maximum applicable load. The structural member that has been utilized to create the pin framework structure must be used to calibrate the strain gauge. A straight piece of the concerned structural member should be loaded incrementally following the pattern of loading outline above.

Corresponding values of strain must be tabulated accordingly including the value of strain at no loading. Next the framework under investigation should be loaded using the same increments of load up to the maximum applicable load. The values of strain for the structural members of the framework should be noted off the strain gauges. The total set of readings must include the values for strain at no loading. The values of the calibration structural member should be utilized to calculate the calibration factor(s) for the strain produced versus applied load.

Next the strain values of the actual framework being tested should be tabulated using the calibration factor(s) from above. The values of strain versus load can then be plotted for the framework in question. These plots can then be utilized to interpolate the loading values for given values of strain for any applied load. This experiment is based on the assumption that the loading of structural members lies within elastic limits and that the pins used to do not display excessive play or rigidity but are free to

...Download file to see next pages Read More
Cite this document
  • APA
  • MLA
  • CHICAGO
(“Department of Mechanical and Automotive Engineering Coursework”, n.d.)
Retrieved de https://studentshare.org/engineering-and-construction/1390738-mechanical-science
(Department of Mechanical and Automotive Engineering Coursework)
https://studentshare.org/engineering-and-construction/1390738-mechanical-science.
“Department of Mechanical and Automotive Engineering Coursework”, n.d. https://studentshare.org/engineering-and-construction/1390738-mechanical-science.
  • Cited: 0 times

CHECK THESE SAMPLES OF Department of Mechanical and Automotive Engineering

How to Run a Successful Consultancy Business

In that case, an automotive engineering design consultancy organization would be required to provide or offer advice on these lines.... One maybe an expert in the chosen field (automotive engineering, for instance) but without the marketing capacity nothing can be done in this field.... The automotive industry is one which is devoted to the design, development and manufacture, maintenance, marketing and selling of world's vehicles or automobiles....
56 Pages (14000 words) Coursework

Mechanical Engineering

He is needed to understand the thermal Bureau of Labor Statistics 1; America Society of mechanical Engineers 1).... The national response to alternative energy sources involves the science of mechanical engineering, and... Mechanical engineering is a broad subject that derives its scope from the necessity to manufacture and design everything from large systems (such as machine tools and spacecraft) to small devices and individual parts (such as Inkjet printer nozzles and micro scale sensors)....
7 Pages (1750 words) Research Paper

Failure Mode Avoidance- How to design and avoid failure

In regards to Failure Mode Avoidance approach, the model and process permit the engineering group to uncover and avoid potential wheel or tire and driveline noise vibration and harshness failure modes.... The changing market needs competent approach to Noise Vibration and Harshness needed to cultivate better decisions and sustain the… The effect of resource processing and component production induced unclear characteristics and appearance of car models designed to avoid failure....
12 Pages (3000 words) Essay

Application of Ceramics in the Automotive Industry

As the automotive industry faces sustained pressure… o deliver innovative design, advanced safety features and environmental-friendly automotives while minimizing the cost of production, use of ceramics looks set to grow.... At the moment, ceramic is used in nearly fifty different automotive uses and the list continues to soar The input of ceramic materials to automobile technologies ranges over driving performance, fuel efficiency and exhaust gas purification....
8 Pages (2000 words) Term Paper

Mechanical Engineering at BMW M Model

Both mechanical and automotive engineer are required to design vehicles for the concerned companies to whom they are employed.... The field of mechanical engineering has high relevancy in… This field of engineering has a lot of scope in the automobile industry.... A mechanical engineer is a specialist in the Mechanics is associated with designing and working of machines and can be ascertained as the main department of all other branches of science....
13 Pages (3250 words) Research Paper

Engineering business functions

The essay "engineering business functions" analyzes inter-relationship between the different processes and functions of an engineering organization.... For instance, for effective production, the mechanical processes involved must all be efficient.... For instance, the purchases department are directly linked to the plant processing company.... It is the purchases department that works towards ensuring that the raw materials are available for processing in the plant....
3 Pages (750 words) Assignment

Engineering Internship Experience

The paper "engineering Internship Experience" discusses that in order to fit into the culture of a company, I would point out my strengths and the skills acquired during the internships when applying for the job.... One is required to apply the engineering principles to practical engineering problems: to use engineering equipment and tools, to make, read and interpret engineering drawings and specifications, to express ideas clearly and concisely, to relate abstract ideas to actual needs, and adopt an effective course of action and to establish and maintain effective working relationships with others....
16 Pages (4000 words) Report

Mechanical Engineering at BMW M Model

Most companies depend on a given form of mechanical systems and as a profession; mechanical engineering is obviously one of the most diverse and dynamic of all engineering disciplines.... This makes any individual who wants to prosper in the field of mechanical engineering prefer it as a company of choice.... This paper "Mechanical engineering at BMW M Model" discusses BMW Group as a company with its headquarters in Germany but operates as a multinational....
12 Pages (3000 words) Case Study
sponsored ads
We use cookies to create the best experience for you. Keep on browsing if you are OK with that, or find out how to manage cookies.
Contact Us